15% OFF
From
Original price was: د.إ 125.00.د.إ 105.00Current price is: د.إ 105.00.
/m²
Nova Floor supplies and installs 2 mm medical-grade vinyl flooring for hospitals, clinics, laboratories, pharmacies, ICUs and wards in Dubai and across the UAE. We offer two healthcare ranges: a PUR-coated homogeneous vinyl supplied in 1.5 m wide rolls, and a single-layer homogeneous medical vinyl with colour running through its full thickness. Choose from 13 healthcare colours, installed with heat-welded seams and coved skirting for a seamless, easy-to-disinfect floor.




Every part of a hospital needs a different floor. Busy corridors need hard-wearing surfaces, wards need quiet ones, and labs and pharmacies need floors that resist chemicals. We match flooring solutions to each zone and colour-code departments so visitors find their way.
Hospitals rarely use one floor everywhere. Here are the six types we supply in Dubai and where each one works best.

Single-layer vinyl for ICUs, wards, theatres and corridors. Takes heavy trolley traffic, and colour never wears away.

Textured vinyl that stays grippy when wet, for washrooms, sluice rooms and hydrotherapy areas.

Layered vinyl with printed wood or stone designs for reception, waiting areas and clinics.

Wood- and stone-look vinyl tiles for non-clinical spaces. They give consultation rooms and offices a warmer look.

Cushioned rubber that absorbs impact and footstep noise. Suits stairs, corridors and busy staff work areas.

Tough vinyl with a polyurethane top coat. Resists scratches and stains, so clinics, labs and pharmacies spend less on upkeep.
Original price was: د.إ 125.00.د.إ 105.00Current price is: د.إ 105.00.
Original price was: د.إ 160.00.د.إ 135.00Current price is: د.إ 135.00.
Original price was: د.إ 170.00.د.إ 145.00Current price is: د.إ 145.00.
Original price was: د.إ 130.00.د.إ 110.00Current price is: د.إ 110.00.
Original price was: د.إ 165.00.د.إ 140.00Current price is: د.إ 140.00.
Original price was: د.إ 145.00.د.إ 125.00Current price is: د.إ 125.00.
Original price was: د.إ 140.00.د.إ 120.00Current price is: د.إ 120.00.
Original price was: د.إ 145.00.د.إ 125.00Current price is: د.إ 125.00.
Save on 2 mm medical vinyl for clinics and hospitals this month.

In a hospital, floor colour does more than look good. We give each department its own colour, so patients and visitors find their way with fewer signs. The colours are welded into the floor, not stuck on top, so they never peel. We keep a clear brightness difference between floor and walls (at least 30 LRV points), so people with weak eyesight can see where a room ends. We use soft matt colours instead of shiny white, which glares under hospital lights. Choose from 13 healthcare colours, including Light Grey, Steel Grey, Blue, Aqua Blue, Mint Green and Beige, with custom inlays and logo cutting.
Our hospital flooring costs AED 95 to 160 per m² for supply only. Installation is priced separately, based on the floor type, the total area, the condition of your subfloor, and extras like welded seams, coved skirting or night work. Book a free site survey and we’ll send you a clear, itemised quote.








We install hospital floors while your facility stays open. Our team works in phases, at night or on weekends, and seals off each area to keep dust away from patients. Every clinical floor is fully glued down, heat-welded at the seams and coved at the walls.
Get Your Hospital Flooring in 4 Steps

We keep medical vinyl in stock in Dubai, give free colour samples and a free site visit, and send a clear quote with all costs before we start.
| Feature | Homogeneous Vinyl | Heterogeneous Vinyl |
|---|---|---|
| Construction | Single layer with colour running through the full thickness | Multiple layers with a printed design under a clear wear layer |
| Wear Behaviour | Looks the same as it wears. There is no surface pattern to rub off. | The pattern sits only on the surface. Heavy wear may slowly expose the backing. |
| Design Range | Mainly solid and flecked colours | Wood, stone and custom prints, with a much wider design choice |
| Typical Thickness | 2 to 2.5 mm (our range: 2 mm) | 2 to 3.5 mm, with a 0.5 to 0.7 mm wear layer |
| Underfoot Comfort | Firm underfoot feel | Softer feel, with cushioned and acoustic backing options |
| Renovation | Can be buffed and re-polished to restore its look | Cannot be restored once the wear layer has worn away |
| Best Specified For | Corridors, wards, ICUs, operating theatres, labs and other clinical zones | Reception areas, waiting areas, consultation rooms and admin spaces |
Your flooring is truly stain and spill-resistant and easy to maintain. My hospital sweepers easily clean the whole floor within 30 minutes without any hassle. Best hospital flooring Dubai suppliers!!

My friend told me about this service, and I hired them to install rubber flooring tiles in chevron geometric patterns in my hospital corridor. After fixing, they applied moisture and UV-resistant coatings to prevent fading. I 100% recommend this company.

I hired this service two months ago to install hospital flooring vinyl. They listened to all my requirements regarding acoustic underlayments and dirt and dust-repellent coatings and fulfilled them. Thank you so much.


Heat-welded homogeneous vinyl sheet. Colour runs full-depth so trolley traffic never wears the pattern away, and welded seams with coved skirting leave no joint for bacteria.
Supply only, AED 95–160 per m². Installation is quoted separately after a free site visit, based on area, subfloor condition, welding and coving.
Homogeneous has colour through its full thickness, so wear doesn’t change it. Heterogeneous is multi-layered with a printed surface design, giving more choice but less durability.
Every grout joint traps bacteria and cleaning fluid. Sheet vinyl welds into one continuous sealed surface, removing those joints entirely, which tiles simply cannot achieve.
Seamless homogeneous vinyl, heat-welded and coved at the walls. Many theatres also specify conductive vinyl earthed to a copper grid to drain static, so always check your project specification.
Yes. But installation detail matters more. Welded seams and coved skirting remove the joints where bacteria actually collect. A treated surface with open joints achieves little.
In-stock colours are delivered quickly across Dubai. A typical ward or clinic takes 1–5 days to install, and larger projects are phased so each area reopens as it completes.
Yes, if the tiles are firmly bonded. We fill the grout lines and level the surface first, otherwise the joints show through the vinyl. Loose or cracked tiles must be removed.
R9–R10 for dry clinical areas, and R10–R11 for sluice rooms, washrooms and hydrotherapy, rated to DIN 51130. Ask us for the datasheet of your chosen range.
Yes. We phase projects section by section, seal work areas, use low-odour adhesives, and schedule noisy stages outside clinical hours. Each area returns to use as it completes.
Dust mop daily, then damp mop with a neutral or approved disinfectant. Avoid high-pH cleaners, which dull the surface. PUR-treated floors need no polishing.
Every specification includes manufacturer datasheets, Declaration of Performance, slip rating and fire classification.
2 mm homogeneous vinyl suits most clinical areas. Heavier-traffic corridors and theatres often specify 2.5 mm. On heterogeneous products, the wear layer matters more than total thickness.
Yes, free samples in your shortlisted colours. We recommend viewing them under your own lighting, since clinical lighting changes how colours look.
Healthcare projects usually specify flooring rated Bfl-s1 under EN 13501-1. Ask us for the fire classification of your chosen range before you order.
Vinyl suits most clinical areas. It is softer, quieter, faster to install and easier to repair. Epoxy works well in plant rooms and service areas, but it needs days to cure.